The
range.
Pick a category, then narrow by style. Start from one of 236 patterns, or send a tech pack and we'll build it.
Team Sports
Full kits for every sport and every level. Every style from 15 pieces.
- Products
- 112
American Football
Baseball
Basketball
Soccer
Softball
Volleyball
7-on-7 Football
Cricket
Field Hockey
Flag Football
Ice Hockey
Lacrosse
Netball
Pickleball
Rugby
Cycling
Motocross & BMX
Roller Derby
Rowing & Crew
Track & Field
Esports
Training Tops
Rugby kits for fifteens and sevens sides
This range is made for union and league clubs, school fifteens, sevens squads and touring sides. It covers the rugby jersey, a short sleeve rugby kit and rugby shorts. The jersey is a polyester performance knit with a fine micro-mesh face, and the shorts are a lightweight woven polyester with a ripstop-style texture. Sublimation prints hoops, crests and sponsor logos across the jersey, and heat transfer adds the numbers.
We make 15 pieces per style at minimum, so a single age-grade side can have its own strip. Your free mockup shows the full kit, and nothing is cut in bulk until you sign off a sample; the bulk is finished 7 days after that. When your squad list is ready, get a quote.
Team kits made in our own Sialkot factory
Soccer, rugby, cricket, basketball or ice hockey: whatever your club, school or league plays, we can make your team kit. The range runs from jerseys, shorts and pants to socks, skorts and uni-suits, in men's and women's cuts. Most pieces are polyester performance knits, which means your whole design can be dye sublimated edge to edge, while player names and numbers go on by heat transfer.
Ordering is the same for every sport: approve a free mockup, then a sample, and bulk production takes 7 days, with a minimum of 15 pieces per style. Every print method runs in-house, and the fabric mills and trim suppliers we use are within 15 minutes of the factory. Start with how ordering works or get a quote.
7-on-7 uniforms for passing leagues
Our 7-on-7 range starts with sleeveless and long sleeve jerseys, plus compression shorts to wear underneath. For a bolder look there is the 7-on-7 uniform: a sleeveless hooded jersey with matching shorts. Every piece is a polyester performance knit, so dye sublimation carries your graphics from shoulder to hem and heat transfer adds each player's number. The range is made for off-season high school programmes, travel teams and camps.
Passing-league rosters are small, which suits our 15-piece minimum per style. Send your colours and logo for a free mockup, then check a sample jersey before anything goes into bulk. Once you approve it, the full order is made in 7 days. See our print methods for numbering options.
Coloured cricket kits for clubs and leagues
Three pieces work as a set here: the cricket shirt, cricket trousers, and the cricket kit that pairs them in one design. The shirt is a lightweight polyester knit, and the trousers are a smooth polyester tricot with slight stretch. The set is made for T20 sides, club elevens and school teams. Sponsor logos are dye sublimated onto the shirt, with names and numbers on the back by heat transfer.
With 15 pieces per style as the minimum, one club side can kit out alone. We draw a free mockup of shirt and trousers together, then sew a sample for your captain. Once it is signed off, the bulk is cut and sewn in 7 days. To feel our fabrics first, order the $100 sample pack.
Sleeveless field hockey jerseys for women
Our sleeveless field hockey jersey is cut for women and made in two finishes: a slightly matte polyester performance knit, or a tricot-like jersey with a light satin sheen. Both are lightweight and suit club sides, school first elevens and university teams. Your design is dye sublimated across the whole jersey, so hoops, stripes and gradients run from neckline to hem, and shirt numbers are added by heat transfer.
The minimum is 15 jerseys per style, and the free mockup is easy to share with your committee before anyone commits. A sample jersey follows for a fitting, and once it is approved we sew the bulk in 7 days. Use the fabric library to compare the two finishes.
Flag football jerseys, sets and shorts
The flag football jersey is cut for women. For men there is the flag football set, a sleeveless jersey with matching shorts, and the shorts also come alone for teams that already have tops. Logos and bold colour blocks are dye sublimated straight into the thin, lightweight polyester of all three, then numbered by heat transfer. Rec leagues, school programmes and corporate teams can dress men's and women's sides in one design.
Order the jersey, set or shorts from 15 pieces per style. Your quote includes a free mockup, and a sample lets you check the cut before bulk. After sign-off, the bulk is produced in 7 days and shipped worldwide on the terms you choose. Read how ordering works for the full sequence.
Ice hockey jerseys, pant shells and socks
Dress the whole bench from one factory. Ice hockey jerseys come in standard, pro and goalie cuts, with practice options for training nights, and pant shells and hockey socks, knitted or sublimated, complete the set. On the polyester jerseys, some with a fine mesh texture, we dye sublimate crests, stripes and sleeve numbers, then heat press each player's name across the back. It suits clubs, university sides and adult league teams.
Jerseys, shells and socks each need 15 pieces per style. You approve a free mockup of the full look, then try a sample jersey over your pads. Bulk production runs 7 days after that, and each piece is checked four times along the way. Our print methods page explains sublimation.
Lacrosse jerseys and skorts for your programme
Men's and women's lacrosse look different on the field, and this range dresses both. The lacrosse jersey is a short sleeve, lightweight polyester knit with perforated mesh inserts at the sides. For women's teams there is the lacrosse skort, a smooth polyester interlock with a clean printed finish. Club, high school and college programmes can sublimate their full design on either piece and add numbers by heat transfer.
Jersey and skort each have a minimum of 15 pieces. A free mockup shows both in your colours, and a sample comes to you for approval before cutting starts. Production of the bulk then takes 7 days. Our fabric library shows the knits we work with.
Netball dresses and skirt sets, made to order
Netball teams tend to choose between a dress and separates, and we make both. The netball dress is a polyester and spandex knit with four-way stretch, cut to skim the body. The skirt set is a smooth, slightly stretchy polyester knit with a matte surface, for squads that prefer a skirt and top. Both suit women's club, school and league teams, with your colours and crest dye sublimated into the fabric.
Dresses and skirt sets are made from 15 pieces per style. We design a free mockup around your crest, and your players try a sample before bulk. Once it is approved, allow 7 days for bulk production, with four quality checks on every garment. Our guide to how ordering works covers the rest.
Pickleball polos, skorts and tanks for clubs
Our pickleball range covers men's and women's kit. Men can wear the pickleball polo with woven shorts, and women can choose a pleated pickleball skort with a close-fitting tank. Dye sublimation puts patterns and logos across the polyester fabrics, and the polo can carry a club crest by heat transfer. It suits clubs, leagues and coaching groups, and pro shops can stock it under their own label.
A club can start small, since the minimum is 15 pieces per style. We mock up your design for free, make a sample to try on court, and run the bulk in 7 days once you approve. Pick a base cloth in our fabric library, or get a quote for the whole club.
Football uniforms from game day to practice
Game day and the practice field call for different kit, and we make both for high school, college and semi-pro teams. For games, American football jerseys come in game and pro cuts, with football pants that have integrated pads. For training there are practice jerseys with a perforated mesh body. Every graphic is dye sublimated, with names and numbers applied by heat transfer.
Game and practice pieces are ordered as separate styles, each from 15 pieces. We supply a free mockup, plus a sample for your coaches to check, and bulk follows in 7 days after sign-off. Check how ordering works well before your season opener, or get a quote today.
Baseball jerseys, pants and practice gear
Start with the button style. The full-button baseball jersey and the 2-button henley are the classics, and the baseball throwback jersey gives a retro look for special games. Below the belt, knicker pants suit teams who like to show their socks. Pinstripes, gradients and script logos are dye sublimated into the polyester, and names and numbers are heat pressed on. The range suits travel teams, high school squads and adult leagues.
Any style can be ordered from 15 pieces. Send your logo and we return a free mockup with jersey and pants together, then a sample to approve. From there, bulk production is a 7-day run. Handle the cloth before you choose with our sample pack.
Basketball kits and reversible jerseys
The basketball kit is the core of this range, in a lightweight polyester knit with a mesh look and a dry hand. Matching basketball shorts are also sold separately, in a polyester mesh with small, even perforations. Reversible basketball jerseys put two colours in one top, so a squad can split into sides at practice without bibs. For clubs, school teams and rec leagues, we sublimate both faces of a reversible and number them by heat transfer.
Reversibles and kits are both available from 15 pieces per style. The free mockup shows both sides of the reversible; after that we sew a sample for sign-off and finish bulk in 7 days. The print methods page compares sublimation with heat transfer.
Soccer kits for academies and Sunday leagues
Whether your players call it soccer or football, the kit starts here. The long sleeve soccer jersey covers cold matchdays and goalkeepers who like their arms covered. Soccer shorts come in two smooth polyester knits, one matte and one with a light sheen. Clubs, academies, schools and Sunday league sides can have stripes, hoops or gradients sublimated across the jersey, with names, numbers and sponsor logos added by heat transfer.
Home or away, we make kits from 15 pieces per style. Tell us your colours and sponsors and we build a free digital mockup of shirt and shorts. Once you approve a sample, we print and stitch the bulk in 7 days. Browse the fabric library, then get a quote before next season.
Softball uniforms cut for women's teams
Our softball range is cut for women, from the jersey down. A crew neck pullover or V-neck softball jersey keeps things simple, and belted pants or knickers finish the uniform, with more neck styles in the range. Colours and logos go into the smooth, lightweight polyester jerseys by dye sublimation; numbers are heat pressed on afterwards. Club, school and college teams can order the whole uniform in one go.
Softball orders start at 15 pieces per jersey or pant style. Mockups cost nothing, and a sample comes first so you can check the fit; bulk then runs 7 days from your approval. A custom sample costs $80–150 and is refunded once your bulk order passes 50 pieces. The how ordering works page sets out each step.
Volleyball kit for men's and women's squads
Women's squads can pair the cap sleeve volleyball jersey with women's spandex shorts. Men's squads can choose the long sleeve volleyball jersey with loose-fit shorts, among other cuts. Libero tops can be made in a contrasting colour from the same design. Like the rest of the polyester jerseys, they are dye sublimated, with numbers front and back by heat transfer. School, club and college programmes can order men's and women's teams in matching designs.
The minimum order is 15 pieces per style, men's or women's. You get a free mockup to approve and a sample to wear in training before bulk, which takes 7 days once you sign off. Choose your jersey cloth from the fabric library.
Esports jerseys for teams and their fans
Our esports jersey is a smooth polyester knit with a fine micro-knit surface, a slight satin sheen and moderate stretch. It suits pro and amateur rosters, university clubs and streamers who want a jersey their community can buy too. Detailed artwork and sponsor logos are dye sublimated across the front, back and sleeves with clean colour, and each player's gamer tag is heat pressed on the back.
You can order from 15 jerseys per style, enough to cover the roster, staff and a few to give away. We send a free mockup with your sponsor placements, sample one jersey for approval, then produce the full run in 7 days. Look through our print methods or get a quote before your next event.
Training tops and polos for match days
Not everything your club wears is a match shirt. The pre-match training top is a lightweight, short sleeve polyester jersey with a little stretch, made for warm-ups and pitch-side sessions. The team polo is a smooth performance knit with a pique-inspired look, smart enough for coaches and staff on travel days. Both pair with any kit in our team sports range. Sublimate the training top in full colour, and add your crest to the polo by embroidery or heat transfer.
Order 15 pieces or more of either top. A free mockup comes with your quote, and a sample is sewn for approval before the 7-day bulk run. If you are new to us, start with the sample pack.
Cycling jerseys and bibs for club rides
A club ride looks sharper in matching kit. The cycling jersey is a short sleeve, stretchy polyester knit with a fine micro-mesh texture, and the cycling bib shorts pair a perforated mesh upper with compression spandex legs. The cycling kit uses a high-stretch technical fabric with graphics that sit flat in the surface. Dye sublimation carries sponsor logos and designs around every panel, for clubs, race teams, charity rides and shop teams.
A club order needs 15 pieces per style. Your kit is mocked up free of charge, then we sew a sample for you to ride in and produce the bulk within 7 days of your approval. Compare jersey and bib fabrics in our fabric library.
Motocross and BMX kit for race teams
Motocross jerseys and pants come in standard and vented versions, or together as the MX uniform set. The standard pants are a woven synthetic shell with reinforced abrasion zones, while the vented pair adds fine perforations and stretch panels at the knee and seat. BMX riders have the BMX race jersey. Sponsor logos and race numbers are dye sublimated into the jerseys, so race teams, dealers and track clubs can match every rider.
Each style needs at least 15 pieces. Every quote carries a free mockup of jersey and pants as one set, and we make a sample for you to approve; 7 days of bulk production follow your approval. Read about our print methods before you send artwork.
Roller derby kit with your names on the back
Derby kit carries a lot of personality, and we cut it for women's and men's teams alike. Roller derby jerseys come in standard and tank cuts, alongside a full roller derby uniform with a compression fit and shorts with a glittering sequin-effect finish. Most pieces are polyester and spandex knits with plenty of stretch. Sublimate your league artwork across the jersey, then add each skater's derby name and number by heat transfer.
Leagues can order from 15 pieces per style, so one travel team can have its own set. Send your logo and skater list when you get a quote, and we lay out every name on a free mockup. Once a sample is signed off, we need 7 days for bulk.
Rowing uni-suits in your club colours
This range covers the rowing uni-suit in men's and women's cuts, a sleeveless uni-suit, and rowing trou, the crew name for rowing shorts. The suits are stretch spandex knits with a close, compressive fit, and the trou is a smooth, lightweight knit with a soft sheen. Stripes, crests and blade colours can be sublimated anywhere on the suit for boat clubs, universities, schools and masters squads.
Suits and trou are made in runs of 15 pieces or more per style. First comes a free mockup in your blade colours, then a sample suit so a rower can check the fit, and approved suits go into bulk production for 7 days. Try our sample pack or explore the fabric library first.
Athletics kit from singlets to half-tights
Track and field needs different cuts for different events. The track singlet comes in standard and crop cuts, and pairs with women's bun-huggers or half-tights. The compression pieces are stretch spandex knits, while split-leg and standard shorts are a light woven polyester. We dye sublimate club colours and designs onto the polyester pieces and add athlete names by heat transfer, for clubs, schools and college teams.
The minimum per style is 15 pieces, whichever event group you dress. Begin with a free mockup in your club colours, approve a sample, and we complete the bulk in 7 days, all printed in-house. See how ordering works, or look up stretch knits and wovens in the fabric library.